Home
> Electrical Equipment > Machines
> Woodworking Chamber driers
PAP-SPM chamber driers are user for drying all kinds of sawed
timber. Their installation does not require any special foundation. In
PAP-SPM drying chambers, the air is heated via the aerodynamic principle. The
heat is generated by the rotor of a specially designed fan blower, which also
makes the air circulate in the drying chamber. A louvered grille is used to adjust
both the temperature and the energy consumption. This grille adjusts the amount
of air passing through the fan and, therefore, the electric motor load. The drying
process is carried out via the air-steam environment's convective method in soft,
normal or forced mode. The chamber has a humid thermal treatment mode for high-quality
drying. The advantages of this aerodynamic heating: even and efficient drying,
fire safety, ease of operation, pollution-free drying.
1. Body 2. Air channel screen 3. Feeding
hole with a lock 4. Rotor 5. Rotary drive 6. Power regulator 7.
Power regulator drive 8. Exhaust nozzle electric drive 9. Humidifying
system 10. Control cabinet 11. Raceway cart 12. Outer rail track
13.Rotary drive electric motor
Specifications |
03 K | 07 K |
14 K | Maximum
one-time load of conventional timber, m/cub. | 5 | 10 |
20 | Operating temperature range, °C | 50...110 | 50...110 | 50...100 |
Time required to dry the conventional timber to 15-20%
of humidity, hours | 48...60 | 48...60 | 48...60 |
Conventional timber per hour's energy rate for 1 m/cub.,
W | 250 | 240 | 200 |
Minimum attainable timber humidity, % | 7...8 | 7...8 | 7...8 |
Installed electrical equipment power, kw | 38.5 | 56.5 | 76.5 |
Drying plant's overall dimensions, mm: length
width height | 6300 2000 2800 | 9930
2432 3100 | 15,930 2432 3100 |
Weight of the drying chamber, kg | 7100 | 9700 | 16,500 |
|