> Electrical Equipment > Machines
Woodworking grinding machines
ShLPS-8L is designed for grinding faces and edges of furniture
boards, parquetry and other woodwork with cylindrical, conical, concave, convex
and raised surfaces.
- Flat billet and edge components are built into the bed plate using a narrow
abrasive belt. The belt is pressed down using a manually-driven sander while the
bed plate is manually moved along the work piece's length.
- Wooden work
pieces are machined on a grinding wheel or on an elastic surface spool that is
installed on the abrasive belt's driving and tension pulley axles.
grinding work pieces with differently angled surfaces, a bed plate with an adjustable
tilt angle, which can be combined with the grinding wheel, is included.
ShLPS-8M is designed for grinding faces of furniture boards, parquetry
and other woodwork.
A new two-speed turntable head with a petal-like polishing tool was introduced
for grinding embossed fronts and laid-on moldings.
|Work piece dimensions' length, mm|
width x height,
belt size length x width, mm||6220x100-160|
|Cutting speed, m/s||17.5|
of socket pieces, pcs.||2|
sizes, mm||180x180 and|
|Required air consumption, cubic m/hour||1900 and 300|
|Overall dimensions' length, mm|
width x height
|Number of electric motors, pcs||1|
|Abrasive belt motor power, kW||3|
motor rotating speed, rpm||1500|
|Work piece dimensions, mm|
|Abrasive belt size, mm|
length x width
|Cutting speed, m/s||20|
|Grinding head petal-like disk diameter,
head rotating speed, rpm||700,900|
|Turntable size, mm ||900|
|Socket piece diameter, mm||180|
Machine dimensions, mm
|Number of electric motors, pcs||2|
|Abrasive belt motor power, kW||2.2|
|Grinding head motor power, kW||0.7||
to our clients
to our clients