|
Home
> Electrical Equipment > Hoisting Machinery
Jib Crane "KL-3"
Jib crane KL-3 is designed for the mechanization of load
lifting and for the transporting of loads during the erection of buildings and
other installations. This crane can be installed either at ground level, or on
the floors of the buildings under construction. This crane is controlled using
a remote push-button station. The KL-3 crane is equipped with a siren to emit
an audible warning signal during its operation. It is very easy to mount, making
this crane your indispensable assistant. This product is designed for
operation in the following conditions: environment - non-explosive;
allowable slope of the seating - less than 3 deg.; allowable wind
speed, in operating condition - 14 m/s; in inactive condition - 33 m/s;
working voltage - 220/380 V; operation mode - low duty.
SPECIFICATIONS | VALUES |
Maximum lifting capacity with a twofold reeving[KAK1]
system, t: at 2.5 m boom at 3.0 m
boom at 4.0 m boom | 1,0
0,8 0,5
| Maximum lifting capacity
with single fold reeving[KAK2] system at any boom, t | 0,5 |
Maximum hook sinking depth, m: with
twofold reeving with single fold reeving |
50 100
| Maximum hook lift height,
m: at 2.5 m boom at 3.0 m boom at
4.0 m boom | 6.0 ± 0.2 5.6 ± 0.2
4.8 ± 0.2 | Maximum load lifting
(lowering)speed, m/min: with twofold reeving with
single fold reeving | 22.2 44.4
|
Radius, m: maximum intermediate
minimum | 4.0 ± 0.1
3.0 ± 0.1 2.5 ± 0.1
| Maximum
load moment, (kN*m) ton-force*m | (26) 2.6 |
Pivoting floor's R max, m | 2
| Support contour, m | 2
x 2 | Platform rotation speed, rpm |
1.88 | Platform
rotation angle, deg | 360 |
Brake | TKG-160 |
Rope diameter GOST 3070-74, mm | 8.1 |
Rope length, m | 130 |
Design mass, ton[KAK3] | 0.900
| Counterbalance weight, ton |
0.890 | | |
Search | |
Services offered
to our clients | |
Services offered
to our clients | |
|