Home > Electrical
Equipment > Welding Equipment Gas cylinders
40-liter acetylene cylinders are made of 30HGSA grade steel.
The cylinder neck thread must be made according to GOST 9909-81. 2 to 5 spare
threads must be left on the valve that is screwed into the cylinder neck. Sealant
must be used when installing the valves.
SPECIFICATIONS |
Cylinder diameter, mm | 219 |
Capacity, l | 40 |
Height, mm | 1350 |
Cylinder weight, kg | 90 |
Porosity, % | 92 |
Dissolvent | Acetone |
Gas capacity, kg (*) | 7.5 |
Maximum gas pressure under +20 °C,
Mpa | 2.3 | 40-liter argon cylinders
are made of 30HGSA, 45, D-grade steel. The weight of these cylinders is provided
exclusive of valves, protector caps, rings and shoes. The specified weight is
a reference value that is used as a nominal figure when manufacturing weight-limited
cylinders. The lengths of the cylinders are specified as reference values and
are used as nominal figures when manufacturing length-limited cylinders. The approximate
weight of the metal protector cap is 1.8 kg, the weight of the fiber-reinforced
material - 0.5 kg while the weight of a shoe is 5.2 kg. The cylinder neck threads
must be manufactured according to GOST 9909-81. 2 to 5 spare threads must
be left on the valve that is screwed into the cylinder neck and sealant must be
used when installing the valves.
SPECIFICATIONS |
Cylinder diameter, mm | 219 |
Capacity, l | 40 |
Height, mm | 1755 |
Cylinder weight, kg | 93 |
Operating pressure, MPa | 19.6 |
40-liter nitrogen cylinders are made of 30HGSA, 45, D-grade
steel. The weight of these cylinders is provided exclusive of valves, protector
caps, rings and shoes. The specified weight is a reference value that is used
as a nominal figure when manufacturing weight-limited cylinders. The lengths of
the cylinders are specified as reference values and are used as nominal figures
when manufacturing length-limited cylinders. The approximate weight of the metal
protector cap is 1.8 kg, the weight of the fiber-reinforced material - 0.5 kg
while the weight of a shoe is 5.2 kg. The cylinder neck threads must be manufactured
according to GOST 9909-81. 2 to 5 spare threads must be left on the valve
that is screwed into the cylinder neck and sealant must be used when installing
the valves.
SPECIFICATIONS |
Cylinder diameter, mm | 219 |
Capacity, l | 40 |
Height, mm | 1755 |
Cylinder weight, kg | 93 |
Operating pressure, MPa | 19.6 |
40-liter helium cylinders are made of 30HGSA, 45, D-grade steel.
The weight of these cylinders is provided exclusive of valves, protector caps,
rings and shoes. The specified weight is a reference value that is used as a nominal
figure when manufacturing weight-limited cylinders. The lengths of the cylinders
are specified as reference values and are used as nominal figures when manufacturing
length-limited cylinders. The approximate weight of the metal protector cap is
1.8 kg, the weight of the fiber-reinforced material - 0.5 kg while the weight
of a shoe is 5.2 kg. The cylinder neck threads must be manufactured according
to GOST 9909-81. 2 to 5 spare threads must be left on the valve that is screwed
into the cylinder neck and sealant must be used when installing the valves.
SPECIFICATIONS |
Cylinder diameter, mm | 219 |
Capacity, l | 40 |
Height, mm | 1755 |
Cylinder weight, kg | 93 |
Operating pressure, MPa | 19.6 |
40-liter oxygen cylinders are
made of 30HGSA, 45, D-grade steel. The weight of these cylinders is provided
exclusive of valves, protector caps, rings and shoes. The specified weight is
a reference value that is used as a nominal figure when manufacturing weight-limited
cylinders. The lengths of the cylinders are specified as reference values and
are used as nominal figures when manufacturing length-limited cylinders. The approximate
weight of metal protector cap is 1.8 kg, the weight of the fiber-reinforced material
- 0.5 kg while the weight of a shoe is 5.2 kg. The cylinder neck threads must
be manufactured according to GOST 9909-81. 2 to 5 spare threads must be left
on the valve that is screwed into the cylinder neck and sealant must be used when
installing the valves.
SPECIFICATIONS |
Cylinder diameter, mm | 219 |
Capacity, l | 40 |
Height, mm | 1755 |
Cylinder weight, kg | 93 |
Operating pressure, MPa | 19.6 |
40-liter carbon dioxide cylinders are made of 30HGSA, 45, D-grade
steel. The weight of these cylinders is provided exclusive of valves, protector
caps, rings and shoes. The specified weight is a reference value that is used
as a nominal figure when manufacturing weight-limited cylinders. The lengths of
the cylinders are specified as reference values and are used as nominal figures
when manufacturing length-limited cylinders. The approximate weight of the metal
protector cap is 1.8 kg, the weight of the fiber-reinforced material - 0.5 kg
while the weight of a shoe is 5.2 kg. The cylinder neck threads must be manufactured
according to GOST 9909-81. 2 to 5 spare threads must be left on the valve
that is screwed into the cylinder neck and sealant must be used when installing
the valves.
SPECIFICATIONS |
Cylinder diameter, mm | 219 |
Capacity, l | 40 |
Height, mm | 1755 |
Cylinder weight, kg | 93 |
Operating pressure, MPa | 19.6 |
Steel-welded propane cylinder for liquefied hydrocarbon gas
type 3-50 GOST 15860 is designed for transportation and storage of propane.
SPECIFICATIONS |
Volume, l | 50 |
Operating pressure, MPa | 1.6 |
Test pressure, MPa | 2.5 |
Overall dimensions, mm: course diameter
height | 299 980 |
Wall thickness, mm | 3 |
Material | steel V St.3 sp. |
Empty cylinder weight, kg | 22 |
Liquefied gas weight, kg | 21.2 |
Locking device type | valve GOST 21804-94 |
|