|
Home > Electrical
Equipment > Welding Equipment
Semiautomatic welding
sets for use in protective gas environments
PDG-315K are designed for
welding usual or stainless steel, copper and brass in protective gas environments
(carbon dioxide, argon) with a consumable electrode wire, using a direct/pulse
current, or with a special flux-cored electrode.
- high quality and productivity of welding
-
built-in two-roller wire feeder
| SPECIFICATIONS | PDG-315K |
| Current, A | 315 |
| PN% | 60 | | Electrode diameter, mm | 0.8-2.0 |
| Voltage, V | 380/3 |
| Dimensions, cm | 40x60x100 | | Weight,
kg | 95 |
PDG-251 is designed for welding usual
or stainless steel, copper and brass in protective gas environments (carbon dioxide,
argon) with consumable electrode wire, using a direct/pulse current, or with a
special flux-cored electrode.
| SPECIFICATIONS | PDG-251 |
| Supply voltage, V | 3x380 |
| Welding current regulation limits, A | 50-315 |
| Rated welding current, A (PV, %) | 250 (60) |
| Number of steps | 10 | | Drive power,
W | 60 | | Electrode wire diameter, mm | 0.8–1.4
| | Electrode wire feed rate, m/hour | 45–950
| | Duration of engaging, % | 60 |
| Overall dimensions, mm (LxBxH) | 830x400x730
| | Weight, kg | 120 |
| SPECIFICATIONS | PDG-312-4 |
| Supply voltage, V |
24 | | Rated welding current, A
(PV, %) | 315 (PV=60%) | | Drive
power, W | 60 | | Electrode
wire diameter, mm | 0.8–1.4 |
| Electrode wire feed rate, m/hour | 40–950 |
| Number of feed rollers | 12 |
| Overall dimensions, mm (LxBxH) |
490x210x450 | | |
Search |  |
Services offered
to our clients | |
Services offered
to our clients | |
|
