Public corporation
Mikhnevo Repair and Engineering Works
MachineryElectrical equipmentSpare parts
low-power crane manipulator set  RS1300A on GAZ 3302 chassis
Truck-mounted crane manipulators :

  • RS1300A

  • Medium-power
  • RK4501V

  • RK7501V

  • Heavy-duty
  • RK42002V

  • Attached implements

  • Open-side grapples

  • Polyp grabs

  • Clip-on chucks for assortment handling

  • Binding clips

  • Loader forks

  • Curb grapples

  • Swinging hoist platforms

  • Home > Equipment > Truck-mounted crane manipulators

    Low-power crane manipulator set (CMS) RS1300A on GAZ 3302 chassis

    Crane manipulators (hydraulic manipulators) belong to a series of advanced technological solutions that help to increase the intensity of machinery use for load transportation and which aid in minimizing the necessary manual labor during loading and unloading. In so doing, these crane manipulators simultaneously decrease the number of people and machines required.

    The RS1300 manipulator made a good showing when mounted on a model GAZ 3302 "Gazel" chassis. With its own weight of 150 kg, this little thing's maximum lifting capacity is 990 kg and its maximum boom is 3.5 m. Owners of two dozens "Gazels" equipped with the RS1300A cranes and traveling about the roads of St. Petersburg and all over Northwest Russia have already estimated this Austrian mini-crane's true worth, reliability and versatility. Another advantage of the RS1300A is that it is not subject to registration with the state engineering supervision authorities (Gostechnadzor).

    Traditionally, lifting and transporting loads during construction and other work requires a truck-mounted crane and a truck. This pattern (a crane and a truck), however, has considerable disadvantages:
  • it requires two units;
  • service expenses are doubled (which especially matters when the work is done a considerable distance away);
  • the lift capacity of commercially available truck-mounted cranes manufactured in Russia is 6 to 40 tons, which renders them inefficient for work requiring transportation of loads under 6 tons;
  • quite often, truck-mounted cranes cannot be used in restricted spaces.

    These problems can be solved by the use of a compact system mounted on commercially available trucks, which are made specifically for lifting and transporting freights between 1 and 26 tons. One such machine combines the main features of two different machines and can replace a truck and a crane. Hydraulic manipulators eliminate the necessity of one of the units and make its operators available for other work. Presently, in European countries, every fifth truck is equipped with a manipulator set.

    To zoom into the image, click on the picture.

    Chassis type GAZ 3302
    maximum load moment 1.2 tm
    maximum hydraulic boom
    of two-piece boom (mechanical length of the boom 2.7 to 3.5 m long - by customer request)

    2.7 m
    angle of boom swing 340 deg.
    maximum lifting capacity
    at 1.2 m boom
    at 1.9 m boom
    at 2.7 m boom

    990 kg
    620 kg
    430 kg
    ground control 1 handheld console - four-piece hydro-distributor
    (an overload protection system with interlocking control levers is available by customer request)
    piers with manual extending width 2.5 m (hydraulic piers are available by customer request)
    CMS width in folded condition 0.61 m
    CMS height in folded condition 1.16 m
    CMS own weight with outriggers 165 kg
    driving gear by 12 V electrical pump

    Alternative installation methods:

    Behind the truck cab; At the truck stern.

    Type one or more keywords

    Site map
    Services offered to our clients
    Place an order
    Here you can place an order or ask our experts a question.

    E-mail addresses for sales departments:
    machinery department
    electrical equipment department

    Moscow representative office
    Address and driving directions

    The company
    Address and driving directions
    Services offered to our clients

    Terms of supply

    Rambler's Top100 Rambler's Top100