Ceramic lamp holders

Lamp holder type

Rated current, A

Dimensions, mm

Weight,
kg

Design characteristics

width or diam.

height

E27UK-02 cord-grip lamp holder

4

49

67

0.15

Ceramic lamp holder without a built-in switch has an E27 screw that comes in a metal sleeve. It has a screwed nipple in its plastic header and is mounted using a lug. It also has screw terminal clamps for connecting copper wires with a 0.5-1.5 mm ² gauge. These lamp holders can be used in any position.

E27FpK-01 ceiling lamp holder

4

73

59

0.19

Ceramic lamp holder without a built-in switch has an E27 screw that comes in a metal sleeve. It is mounted using the straight flange and has screw terminal clamps for connecting copper, aluminum and copper-aluminum wires with a 0.5-2.5 mm² gauge. This lamp holder can be used in any position.

E27FnKP-01 wall-board lamp holder

4

73

69

0.20

Ceramic lamp holder without a built-in switch has an E27 screw that comes in a metal sleeve. It is mounted using the inclined flange and has screw terminal clamps for connecting copper, aluminum and copper-aluminum wires with a 0.5-2.5 mm² gauge. This lamp holder can be used in any position.

E27N-501 wall-board lamp holder

4

42

58

0.065

A lamp holder without a built-in switch has an E27 screw that comes in a metal sleeve. It is mounted using the inclined flange and has screw terminal clamps for connecting copper, aluminum and copper-aluminum wires with a gauge of 0.5-2.5 mm.

E40FPK-01 (Goliath)

16

72

90

0.45

Ceramic lamp holder without a built-in switch has an E40 screw that comes in a non-conductor metal sleeve. It is mounted using the straight flange and has screw terminal clamps for connecting copper wires with a 1.5-4.0 mm² gauge. This lamp holder can be used in any position.