Carbolite lamp holders

Lamp holder type

Rated current, A

Dimensions, mm

Weight,
kg

Design characteristics

width or diam.

height

E27N12P-01 cord-grip

4

40

58

0,049

Plastic lamp holder without a built-in switch has an E27 screw that comes in a metal sleeve. This lamp holder has a screwed nipple in its plastic header and grooves for mounting into the armature. It also has screw terminal clamps for connecting copper wires with a 0.5-1.5 mm ² gauge. These lamp holders can be used in any position.

E27N12RP-01 cord-grip with fit ring

4

50

58

0,075

Plastic lamp holder without a built-in switch has an E27 screw that comes in a metal sleeve. This lamp holder has a screwed nipple in its plastic header and mounting grooves, with one ring for diffusor mounting. It also has screw terminal clamps for connecting copper wires with a 0.5-1.5 mm ² gauge. These lamp holders can be used in any position.

E27FpP-01 ceiling lamp holder

4

71

58

0.066

Plastic lamp holder without a built-in switch has an E27 screw that comes in a metal sleeve. It is mounted using the straight flange and has screw terminal clamps for connecting copper, aluminum and copper-aluminum wires with a 0.5-2.5 mm² gauge. This lamp holder can be used in any position.

E27FnP-01 wall-board lamp holder

4

71

79

0.068

Plastic lamp holder without built-in switch has an E27 screw that comes in a metal sleeve. It is mounted using the inclined flange and has screw terminal clamps for connecting copper, aluminum and copper-aluminum wires with a 0.5-2.5 mm² gauge. This lamp holder can be used in any position.