OSM
OSM1 OSVMOSO-0.25OSOV-0.25TSZI
TDM-301TDM-401TDM-503
Oil: OMP,
TMGKiosk
substations
Single-phaseThree-phaseElectronic
Movable:
ED8,
16, 30, 60, 100 ED100,
ED200 ED630,
ED1000 Stationary: AD8S,
16S, 30S, 60S, 100 AD8C
emergency AD200S,
AD315S, AD
and ADS Low-power: gasoline,
diesel
|
|
Home > Electrical
Equipment > Transformers and stabilizers SNO-Sh single-phase
stabilizers
SNO-Sh single-phase voltage stabilizers (six-key) are designed
for improving the power supply quality in personal computers, automatic machinery
circuits, domestic electrical appliances, copy machines and other imported and
domestic electronic devices when the power mains are subject to a wide range of
voltage fluctuations, including extreme voltage changes. These stabilizers are
based on a state-of-the-art thyristor control system combined with noise filters.
Equipped
with an overload and short-circuit protection system. Do not cause non-linear
distortions. Suppress electromagnetic interference. Decrease the amount
of higher harmonics in the supply voltage. The output voltage is limited to
the minimum if it exceeds its limit.
SPECIFICATIONS |
for all SNO-Sh's |
Voltage, V input output |
160 - 178 220 -10% | 178 - 260 220
(+3, -5)% | 260 - 275 220 +10% |
Efficiency, % | 95 |
Power factor | 0.98 |
Coefficient of the output
voltage's sinusoid curve distortion caused by the stabilizer, % |
1 |
Output voltage recovery time, s - under load-off and load-on from zero to
100% - under input voltage, jumping from the range's lower to upper limits
| 0.3 0.7 |
Stabilizer | Capacity,
kilovolt-ampere | Overall dimensions, mm |
Weight, kg |
SNO-Sh-0.4/0.5 | 0.4 |
185 x 285 x 125 | 5 |
SNO-Sh-0.63/0.5 | 0.63 | 7 |
SNO-Sh-1.0/0.5 | 1.0 | 10 |
SNO-Sh-2.0/0.5 | 2.0 | 145
x 225 x325 235 x 390 x 90 | 11 |
SNO-Sh-2.5/0.5 | 2.5 | 17;
18 | SNO-Sh-4.0/0.5 | 4.0 | 185 |
SNO-Sh-5.1/0.5 | 5.1 | 250
x 495 x 395 | 33; 35 |
SNO-Sh-6.3/0.5 | 6.3 | 36 |
SNO-Sh-10.0/0.5 | 10.0 | 45 |
| |
Search | |
Services offered
to our clients | |
Services offered
to our clients | |
|